|
Our team consists of six qualified members in the field
of Testing System and their sales. Our clientele not only
includes the Chinese domestic users but also U.S.A, Switzerland,
Belgium, France, Italy and Spain etc. We can supply not only
the testing equipment, but can also provide our customers
with advice and technical solutions in the field of testing.
This ability of our department gives satisfaction to all our
users because they can come to us regarding a number of problems.
When the customer purchases the testing equipments from us,
they will receive complete set of solutions, high quality
services and very good quality products.
A. Our Products:
1. Performance Test System
for the Absorber & Oil-gas Suspension:
Includes the following:
a. The Hydraulic Servo Actuator
with the hydrostatic bearing
b. The pre-load with an individual
control, which is used to set the initial balance situation
and pre-load of the specimen arbitrarily.
This equipment is used to
test dynamic characteristics of the hydraulic suspension,
the atmosphere spring, the metal and the rubber absorber (dynamic
stiffness and damping etc.).
2. Structure Strength &
Stiffness Test System:
Includes the following:
a. The multi-point auto-corresponding
hydraulic servo and loading spectrum system (Used in the static
strength and the static stiffness for aerospace, car, architecture
and bridge structure).
b. The multi-channel data acquisition
and transacting system (To measure the parameter for strain,
displacement, moment and force).
c. The multi-channel acoustic
emission and monitoring system
3. Fatigue Test System:
Includes:
a. Single-point hydraulic servo
and fatigue load system (used in the tension compression,
bend and torsion fatigue test for the spare parts of the structure)
b. Multi-point hydraulic servo
fatigue load system (used in the multi-point fatigue test
for aerospace and car structure)
c. Multi-channel fatigue data
acquisition and transacting system (used in the analysis of
the fatigue data and curve fitting method)
4. Road Simulating Test
System:
This system is used in testing
smooth and lasting performance of the whole car and to simulate
the vibration on the wheel in the process of actual traveling
for the car.
5. 6 DOF Vibration
Test System:
This system is used in simulating
the low frequency environment for flying and transportation
environment of the ground. At the same time it will simulate
the vibrations in three horizontal moving directions and three
rotational directions.
6. Multi-shakers/Multi-axes
Vibration Test System:
Includes:
a. Multi-point exciting and
low frequency vibration test system
b. Multi-point exciting middle
and high frequency vibration test system
7. Single-axial Vibration
Test System:
Includes:
a. Hydraulic Vibration test
system
b. Dynamic Vibration test system
8. Shock Test System:
Includes:
a. Hammer Shock Test System
b. Pneumatic Shock Test System
c. Free Fall Shock Test System
d. Horizontal Shock Test System
9. Measurement Equipments
for the weight and center of mass:
a. Multi-point weight method
bases on the high precision
b. Dynamic or hydraulic lean
device (the max obliquity is 30?)
10. Measurement equipments
for the Moment of Inertia:
a. Used in exact air bearing
in order to avoid an influence of attrition
b. Measuring the moment of
inertia and the center of mass coordinate
|
